MHS Multisec Anthrasec Steel Radiator 1665 x 592mm 4 Column 37 Section

• Nippled tubular steel column radiators
• Watts (Δt 50ºC): 2971
  
• BTU (Δt 50ºC): 10137
  
• Material: Steel
• Column: 4
  
• Section: 37
• Depth of radiator : 148mm
• 25mm Diameter Tube
• Tapping Centres: 535mm
• Distance from Wall: 180-190mm
• Weight: 71.4 Kg
• Water Content: 42.2 Ltr
  
• 1/2 Inch BSP Connection
  
• Operating pressure up to 8 bar
• Maximum operating temperature 95°C
• Seated 'O' rings ensure simple leak free jointing every time
• Cylindrical column concept Radiator
• Stylish Contemporary Radiator based on a Traditional Theme
  
• Image shown is for illustration purpose only
• Refer technical diagram for more details
  
• Installation guide provided [Refer PDF]
• 2 pair of Insertable feet are optional- 120mm high [Refer Option]
• Radiator valves sold separately - Click Here.

Water Treatment
MHS Multi Column Radiator are for use on closed heating systems only; they are not suitable for installation on secondary HWS circuits. On completion of the installation the entire system MUST be thoroughly cleaned and flushed to remove debris/flux residues etc. If a chemical cleanser is used, it must be thoroughly flushed from the system. Following this, the system MUST be dosed with a good eminence water treatment to prevent corrosion. System design, flushing and dosing must be in accordance with BS 5449: 1990, BS EN 12828 & 12831: 2003 and BS 7593: 2006
IMPORTANT: Failure to observe these requirements will render the guarantee on the Radiator void. Corrosion inhibitor must be used in accordance with the manufacturer’s instructions and recommendations and should take into account the particular metals within the system.

• Download the PDF File